Notice the working process of copper wire recycling machine

Dry copper wire recycling machine is a kind of mechanical equipment used to recycle waste wires. It separates the copper metal and the outer plastic layer of the waste wires. Under the action of wind, the two materials of different materials, copper wire and plastic skin, move through the vibration generated by the vibration of the screen surface, so that the copper wire with higher density and heavier mass moves toward the copper outlet against the screen surface, while the lighter one moves forward. The plastic skin floats on the copper wire and flows to the skin outlet, so as to achieve the purpose of separating copper and plastic. So, what problems should be paid attention to in the production of waste wire recycling equipment?

1. When operating the copper wire recycling machine, the production personnel should stand on the side to prevent splashes.

2. Before inputting the material, the copper wire and the aluminum wire should be sorted and not mixed together and broken. Don't mix thick and thin lines, it will affect the sorting effect.

3. Don't shut down the machine immediately after the material is put in, wait for the material in the equipment to be completely discharged before shutting down. Also, check whether there is any material remaining in the crushing chamber before starting the machine.

4. The copper wire recycling machine equipment cannot be used to crush other materials, but can only be used to crush various copper wires and aluminum wires.

5. When the copper wire recycling machine is working, pay attention to whether the feeding is uniform. If there is any abnormal situation, it should be stopped immediately for inspection, and the work can be continued after the fault is removed.

6. Operators are not allowed to disassemble the equipment without permission, let alone leave maintenance tools in the equipment.

Suny Group : http://www.sunyrecycle.com/，All rights reserved。