Specific recycling steps of lithium battery recycling equipment

The process flow of lithium battery recycling equipment, the valuable metal resources in lithium batteries can be extracted through the crushing, sorting and recycling technology of waste lithium battery recycling equipment, and the properties of these metal resources will not be destroyed. The specific steps are as follows:

1. The battery pole piece waste is coarsely pulverized by a double-shaft pulverizer;

2. The battery electrode waste is placed in the vibrating feeder and forwarded to the fine crusher. During the conveying process, the vibrating black powder in the battery electrode waste is sucked into the cyclone feeder for recycling;

3. The battery pole piece waste is shredded by a shredder, and the size of the battery pole piece waste after shredding is less than or equal to 1cm;

4. Put the broken battery pole piece waste into the vibrating feeder and transport it forward to the grinder. During the conveying process, the vibrating black powder in the battery pole piece waste is sucked into the cyclone feeder for recycling ;

5. The scrap of battery electrodes is ground and broken by a grinder, and the size of the scrap of ground and broken battery electrodes is less than or equal to 1mm;

6. Separation of battery pole piece waste: the ground battery pole piece waste is recovered from the fine powder outlet of the classifier from the negative pressure suction cyclone feeder of the classifier, and the coarse aluminum particles are recovered from the coarse powder outlet of the classifier discharge.

The waste lithium battery recycling device adopts scientific and efficient physical crushing and screening process, odor treatment and collection facilities, and has the advantages of green environmental protection.

Suny Group : http://www.sunyrecycle.com/，All rights reserved。